Create a Website Account - Manage notification subscriptions, save form progress and more.
Click Here for more information on Roadway Details
Show All Answers
You can check your permit status online at City of Port Orange, FL Public Portal (smartgovcommunity.com).
Answer: A roof repair shall be limited to 100 square feet of shingles unless otherwise authorized by the Building Official and does not involve replacement of sheathing or repair/replacement of structural components. No permit is required where the scope of work meets the criteria mentioned herein.
Yes. A permit is required for repairs to roof sheathing or structural components.
Yes. A roofing permit is required any time re-roofing is occurring over 30 square feet, and up to 25% of the roof area per FBCE 5th edition 708.1.1.
Fees for a roofing permit shall be as established in the City of Port Orange's fee resolution.
Contractor roofing inspection process1st inspection consists of three inspections all scheduled together.Dry-inFlashingIn-progress (consists of inspector picking up the completed inspection nailing affidavit)No shingles should be installed at this point.2nd inspectionFinalOwner-builder roofing inspection process1. Remove old roofing material, re-nail roof with 8d ring shank nails 6inches on center (per table R908.7.1.2 Florida building code residential), schedule in-person status inspection to be performed by city staff or vendors. After inspection passes, cover roof with approved underlayment and install needed flashing and drip edge.2. Schedule dry-in and flashing inspections, no shingles/metal roofing are to be installed at this point. Once this inspection has passed, then install final roofing material3. Schedule final inspection once all final roofing material has been installed, dumpster removed, and site cleaned up.4. Owner-builders roof inspections may be done in partials to avoid open plywood exposed to weather